- 16’ X 10’ Height 12’
- Dumping height raised: 12’
- Capacity: aprox. 900 cu. Feet
- Cylinder size: 4 ½” lift
- Cylinder size: 5” tilt
- Working capacity: 20,000 lbs.
- Motor: 30 hp. Three phase
- Oil required: 70 gal universal hyd. Oil
- Scale: Digistar load cells (4) no monitor
- VFD: Variance Frequency Drive for motor
- Programmable PLC to adjust dump cycles
- Self leveler on box
Introducing the Batch Box, a Feed Batching System by Feeding Systems, LLC.
The Batch Box was created by cattle feeders for feeders. It is designed to streamline the feedlot feeding processes.Contact Us Today
Our Products
The Batch Box is a hydraulically raised and lowered side-dump box powered by an electric motor, and controlled via remote control. Serving as a temporary location to place batches of feed, the Batch Box reduces the amount of time spent running a loader between feed ingredients and a waiting feed truck. Instead of the feed truck waiting on the loader, the ingredients for a batch of feed can be placed inside the Batch Box while the feed truck is off distributing its current load. By the time the feed truck returns to refill, the loader will have had time to fill the Bach Box with all the feed ingredients. Dumping the accumulated feed batch into the feed truck can be done in 20 – 30 seconds, as opposed to waiting for the loader to fetch each individual ingredient. Currently the Batch Box is offered in two sizes: the BB900 and BB1100 HD. The Batch Box is designed to eliminate one to two feed trucks, saving time and money. With less idle time on the payloader, cattle get their feed faster and more consistently.
Steve Niewohner with Niewohner Cattle and inventor of the Batch Box, saw a need at the feedlot to streamline and speed up the feeding process. He can attest to the efficiency and speed of the Batch Box. The entire feeding process can now be completed in seven hours, a full three hours faster than the time spent prior to the installation of double Batch Boxes. Instead of three feed trucks struggling to keep up, only two feed trucks are required to do the job.
All hinge points are greasable and have replaceable brass bushings. Grease bank on each side of box for convenience.
- Superior quality for superior stability and durability
- 43.5′ X 46′ or 40′ x 40′
- 8.5′ square concrete base and four 6″ poles that support truss designed shade structure
- Portable
- 15′ clearance
- Tarps roll to center for storage
- 19 X 10’ Height 12’
- Dumping height raised: 12’
- Capacity: aprox. 1,100 cu. Feet
- Cylinder size: 6” lift
- Cylinder size: 6” tilt
- Working capacity: 40,000 lbs.
- Motor: 60 hp. Three phase
- Oil required: 70 gal universal hyd. Oil
- Scale: Digistar load cells (4) no monitor
- VFD: Variance Frequency Drive for motor
- Programmable PLC to adjust dump cycles
- Self leveler on box
All hinge points are greasable and have replaceable brass bushings. Grease bank on each side of box for convenience.
- 19 X 10’ Height 12’
- Dumping height raised: 12’
- Capacity: aprox. 1,600 cu. Feet
- Cylinder size: 6” lift
- Cylinder size: 6” tilt
- Working capacity: 40,000 lbs.
- Motor: 60 hp. Three phase
- Oil required: 70 gal universal hyd. Oil
- Scale: Digistar load cells (4) no monitor
- VFD: Variance Frequency Drive for motor
- Programmable PLC to adjust dump cycles
- Self leveler on box
All hinge points are greasable and have replaceable brass bushings. Grease bank on each side of box for convenience.
The AG Series SIDUMP’R trailer is designed for feedlots by feedlot owners and operators. These units are intended for stockpiling manure and back filling pens with dirt or sand, all year round. These versatile work-horses can also haul concrete rubble, trees, rebar and other demolition material.
The SDR231 has a 31 ft. frame and is equipped with a 24 ft. tub. The SDR235 has a 35 ft. frame and is equipped with a 28 ft. tub. They are designed to be pulled with an ag tractor and does not require a PTO. Ag application trailers are not subject to FET Taxes.
A bolt on high cube can also be added to the Ag trailer to add additional uses. With the high cube added the ag trailer was able to hold 16 tons of haylage and 25 tons of silage.
Unlike your typical spreader, there are no chains, sprockets or bearings that wear out and require high maintenance. The single center cylinder is protected and pivots on two greaseless bushings and can dump to either side. For more product information please visit our product listing on sidumpr.com.
- 1200 bushel capacity
- available on track or wheels
Please contact our sales dept for more info: 402.564.1400 or 888.743.8677. Or email us at: info@feedingsystems.biz
Our Location
2500 E 23rd St., Columbus, NE 68601
402.564.1400 | 888.743.8677
info@feedingsystems.biz
Mon – Fri: 8:00 – 5:00
402.564.1400 | 888.743.8677
info@feedingsystems.biz
Mon – Fri: 8:00 – 5:00
Batch Box Testimonies
Timmerman and Sons, a family owned business that ranch and feed cattle in Nebraska, South Dakota, Colorado, Texas and Kansas. Timmermans utilize the Batch Box in their feedlots. Andrew Timmerman discusses the importance of the Batch Box. “Our feedlots will not operate without the use of a Batch Box. The Bach Box has completely streamlined our feeding system by speeding up feeding, saving time and increasing production. It eliminated one feed truck and now able to utilize the extra person from that truck.”
Dave Cherry, owner of Cherry Cattle Inc, (CCI), has an 8000 head cattle feed lot near Genoa, NE. “I have cut my overall feeding expenses by 33% by adding one Batch Box along with eliminating one feed truck. I know have an extra truck in case of a breakdown. You couldn’t sell me on NOT having a Batch Box”
Jack Lawless, feed yard manager for Gotsch Cattle Company, concurs with Timmerman. “We have greatly improved our feeding time and efficiency by utilizing the two Batch Box system with one payloader. They really help us cover the yards in a timely manner. Any service issues have been handled quickly by Steve and his crew. I don’t know what we would do without them now!”
Our Videos